Description:

SDR 101 is a DSP digital demodulation radio based on SDR software-defined radio architecture. It has a 192kHz width spectrogram and waterfall display capabilities, and cooperates with 16bit sampling to realize a high dynamic receiver with CW, AM, SSB, FM demodulation functions. The whole machine adopts an all-aluminum alloy CNC shell, with a 4.3-inch 800x480 resolution high-brightness IPS LCD display, while maintaining a compact and compact body.

Immediately take it to the outdoors, enjoy the natural scenery and the fun of listening anytime, anywhere!

Tips uff1aOnly the frequency input function can be touched. Other functions do not support touch screen function and can only be selected by pressing the knob.

>>Please click here to download the SDR 101 product manual<<

Basic parameters:

Display technology:uff1a 4.3-inch IPS 800x480 resolution DC dimming bright LCD

Control methoduff1a resistive touch screen + rotary encoder

Frequency rangeuff1a 100k u2013 149MHz

Working modeuff1a CW, AM, SSB single sideband (LSB/USB), WFM, FM broadcast stereo (requires earphones)

Step frequencyuff1a 1Hz/10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz

Spectral bandwidthuff1a 192kHz, 128kHz, 64kHz, FFT real-time spectrum display

Antenna interfaceuff1a BNC male, impedance 50u03a9, maximum input power -20dBm

Reference crystaluff1a TCXO 26MHz u00b10.5ppm

Audio interfaceuff1a support ordinary 3.5mm earphone or CTIA (American Standard) interface earphone

Speaker poweruff1a maximum 3W, 4u03a9 multimedia speaker speaker

Charging portuff1a USB Type-C, 5.0V/2A

Current consumptionuff1a about 250mA @ 5V

Battery capacityuff1a 5000mAh/3.7V, 18.5Wh

Use timeuff1a About 10-12 hours, depending on the volume and brightness settings of the machine

Channel savinguff1a 99 channels can be preset, preset radio station name, station frequency and demodulation mode

Body sizeuff1a 136 x 74 x 22mm (L x W x H) (without protrusions)

Body weightuff1a about 310g (host only)

Receiver parameters

RF preamp gain: fixed 20dB

Circuit Type: Zero IF ZIF

Sideband suppression: u2265 50dB

Test conditions: 50 ohm input impedance, preamp 20dB on, AGC on

Display control item list

Twelve items that can be selected by the encoder

1. Channel selection : 1-99

2. Frequency setting : 100k u2013 149MHz, minimum step 1Hz

3. Speaker volume(SPK) : 0~35dB, 1dB step

4. Earphone volume(EAR) : 0~35dB, 1dB step

5. Modulation : CW, LSB, USB, AM, WFM, STE(FM stereo), I/Q

6. AGC setting : OFF, SLOW, MID, FAST

7. Reference level(REF) : -99~99dB, 1dB step

8. Backlight brightness(LCD) : 1%~99%

9. IF GAIN : -12~67dB, 1dB step

10. Spectrum style settings : Green fill, Green line, Blue fill, White line

11. Spectrum bandwidth settings : RF spectrum (192kHz, 128kHz, 64kHz) and Audio spectrum (64kHz)

12. Waterfall area settingsuff1aWaterfall or Waveform (x1 / x8 / x64 amplitude)

Five items not selectable by the encoder

A. battery level display

B. date and time settings

C. radio information display: preset radio name capability

D. display of current spectrum bandwidth

E. (POWER) antenna port input power display

State of charge and discharge

Attention points

1. The machine adopts SDR architecture. If there is a strong broadcasting station near you, the phenomenon of mirror radio may appear.

2. The input impedance of the antenna interface is 50u03a9. For the LW/MW radio, it is recommended to connect a dedicated active antenna for better listening effect.

3. Please pay attention to the volume setting of the earphone (EAR) before using the earphone to listen to avoid discomfort caused by excessive volume.

Supported frequency bands and coverage

Package Included:

1 x SDR 101 4.3 inch IPS screen host
1 x USB Type-C data cable
1 x BNC 7-section whip antenna
1 x Quick Start Guide Instruction Manual
1 x Resistive screen double-head touch pen